The INOVA light is very popular and need not much of a description. Pair these up inside some gloves, or as an additional light to an orbit, and start dottin' your way around the rave impressing everyone around you!
The color is: RYG Ribbon (3 different colors which produce a Ribbon effect in high power mode)
Product Highlights
Two Functions:
o High power
o Signal mode
- Temperature Operation Range from -20° to +40°C
- Easy-Open/Snap-Shut Construction for effortless battery replacement
- Durable Stainless-Steel Universal Clip
- Limited Lifetime Warranty USA
Press and hold down the button for 15 seconds until the
light goes out.
Press the button one time for high power
Press the button two times for low power
Press the button three times for strobe
If you leave your Microlight on any setting for more than 2 seconds the next
press of the button will turn it off and not go to the next function.
In the high power setting your Microlight will automatically shut off after 4
minutes. Low power and strobe settings will run as long as they are active.
To reset your Microlight into signal mode:
Press the button three times for strobe mode.
While the light is strobing, press and hold the button for 5 seconds.
In signal mode your light will only work as a squeeze light.
To activate normal operating modes press and hold down the button for 15 seconds
until the light goes out.
