They're finally here! Get that awesome dot/strobe effect when you give lightshows!



The INOVA light is very popular and need not much of a description. Pair these up inside some gloves, or as an additional light to an orbit, and start dottin' your way around the rave impressing everyone around you!

The color is: Deep Purple/Violet/Blue Dots with Red Tail

Definitely not your typical Purple Inova! High power mode displays a brighter yet deep bluish purple (almost like indigo). In dot mode, you will see an amazing RED ribbon with BLUE dots! It is like having a red inova set on high power and a blue inova set on dot mode, in one!

Product Highlights

Four Functions:

o High power
o Low power
o Strobe
o Signal mode

- Temperature Operation Range from -20° to +40°C
- Easy-Open/Snap-Shut Construction for effortless battery replacement
- Durable Stainless-Steel Universal Clip
- Limited Lifetime Warranty USA

TO ACTIVATE YOUR MICROLIGHT FOR THE FIRST TIME:

Press and hold down the button for 15 seconds until the light goes out.

OPERATION GUIDE

Press the button one time for high power
Press the button two times for low power
Press the button three times for strobe

If you leave your Microlight on any setting for more than 2 seconds the next press of the button will turn it off and not go to the next function.

In the high power setting your Microlight will automatically shut off after 4 minutes. Low power and strobe settings will run as long as they are active.

To reset your Microlight into signal mode:
Press the button three times for strobe mode.
While the light is strobing, press and hold the button for 5 seconds.
In signal mode your light will only work as a squeeze light.

To activate normal operating modes press and hold down the button for 15 seconds until the light goes out.